EA-PSB 10010-60 2U 600W |
◎ TECHNICAL DETAILS
DC-Output
Voltage range | 0 - 10V |
Ripple rms CV | 10mV BW 300kHz |
Ripple and noise p-p CV | 100mV BW 20MHz |
UMin for IMax (Sink) | 0.8V |
Current range | 0 - 60A |
Power range*1 | 0 - 600W |
Resistance range | 0.04Ω - 80Ω |
Output capacity | 8640㎌ |
Efficiency up to | 93.0%*2 |
Isolation
Negative DC-Pol <-> PE | ±1000 V DC |
Positive DC-Pol <-> PE | ±1000 V DC |
Article number | 30000734 |
EA-PS 10000 2U 1.5kW - 3.0kW |
Programmable DC-Power Supply
FEATURES | Wide range input: 110V - 240V, ±10%, 1ph AC |
Active Power Factor Correction, typical 0.99 | |
Very high efficiency of up to 96% | |
High performance with 15kw per unit | |
Voltages from 0 - 60V up to 0 - 1500V | |
| Currents from 0 - 6A up to 0 - 120A |
Flexible, power regulated DC output stages (autoranging) | |
Regulation modes CV, CC, CP, CR with fast crossover | |
Digital regulation, high resolution with 16 bit ADCs and DACs, selection of voltage control speed: Normal, Fast, Slow | |
Color 5" TFT display with touch control and intuitive user interface | |
| Galvanically isolated Share-Bus for parallel operation of all power classes in the 10000 series |
Master-slave bus for parallel operation of up to 64 units of same type in all power classes of the 10000 series | |
Command languages and drivers: SCPI and ModBus, LabVIEW, IVI |
Built-in interfaces | USB, Ethernet, Analog, USB Host, Master-Slave bus, Share Bus |
Optional interfaces | CAN, CANopen, RS232, Profibus, EtherCAT, Profinet-with one or two ports, Modbus-with one or two ports, Ethernet-with one or two ports |
Software | EA-Power Control |