EA-PS 10750-20 3U 5000W |
◎ TECHNICAL DETAILS
Product type: | DC Laboratory Power Supply |
Voltage range: | 0-750 V |
Ripple rms CV: | =<200 mV (BW 300 kHz*1) |
Ripple and noise p-p CV: | =<500 mV (BW 20 MHz*1) |
Current range: | 0 - 20 A |
Power range*1: | 0-5000 W (0-3000W) |
Resistance range: | 1.2Ω - 2200 Ω |
Output capacity: | 180 µF |
Efficiency up to: | 95.5% *3 |
P MAX(Standard): | Range 1: 3.5 kW / Range 2: 5.5 kW |
P MAX(US208V): | 6 kW |
Phase Current(Standard): | Range 1: =<29 A / Range 2: =<27 A |
| Negative DC-Pol <-> PE: | ±1500 V DC |
Positive DC-Pol <-> PE: | + 2000 V DC |
Standard | 06230834 |
US208V | 06238834 |
EA-PS 10000 3U 5kW - 10kW - 15kW |
Programmable Electronic DC power supply
FEATURES | Wide range input: 208V - 480V, ±10%, 3ph AC |
Active Power Factor Correction, typical 0.99 | |
Very high efficiency of up to 96% | |
High performance with 15kw per unit | |
Voltages from 0 - 60V up to 0 - 2000V | |
| Currents from 0 - 20A up to 0 - 510A |
Flexible, power regulated DC output stages (autoranging) | |
Regulation modes CV, CC, CP, CR with fast crossover | |
Digital regulation, high resolution with 16 bit ADCs and DACs, selection of voltage control speed: Normal, Fast, Slow | |
Color 5" TFT display with touch control and intuitive user interface | |
| Galvanically isolated Share-Bus for parallel operation of all power classes in the 10000 series |
Master-slave bus for parallel operation of up to 64 units of same type in all power classes of the 10000 series | |
Command languages and drivers: SCPI and ModBus, LabVIEW, IVI |
Built-in interfaces | USB, Ethernet, Analog, USB Host, Master-Slave bus, Share Bus |
Optional interfaces | CAN, CANopen, RS232, Profibus, EtherCAT, Profinet-with one or two ports, Modbus-with one or two ports, Ethernet-with one or two ports |
Software | EA-Power Control |
50000원 이하 배송비 2000원
30000원 이하 배송비 3000원
20000원 이하 배송비 4000원
고객센터
031-737-4811~3
운영시간 09:00 - 18:00
점심시간 12:00 - 13:00
주말,공휴일 휴무
첫 후기를 기다리고 있어요. 
